XTC-3D Print Epoxy Coating

SKU: 800479

Size: 6.4 oz Kit
Price:
$19.95

Description

XTC-3D is a two-part epoxy coating made especially for eliminating striations on 3D printed parts. It dramatically reduces the amount of post finishing work necessary to remove striations and smooth the surface of the 3D print. Can be applied to both SLA and SLS prints and works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. XTC-3D is mixed 2A:1B by volume and the mixed resin brushes easily onto any 3D print surface. It holds a vertical surface extremely well and very little is needed to cover a large area. XTC-3D dries clear in thin layers and slightly yellow in thick sections. Can be thinned with denatured alcohol. Coverage: 1oz.(28.3 grams) of mixed material will cover 101 sq.in.(651 sq.cm.) applied at 1/64in.(.04cm) thickness. Working time is 10 minutes if you mix and leave the resin in a cup. You can extend the working time to 15 minutes by pouring the material into a flat container and reduce the mass concentration. XTC-3D cures in 2 to 3.5 hours (depending on mass) to a smooth glass-like, high gloss finish. To eliminate the high gloss finish, lightly sand or buff with steel wool. Color can be added by mixing XTC-3D with SO-Strong, UVO or Ignite colorants. You can add fillers, metal powders, Cast Magic or Glow Worm for a variety of finished effects. You can also paint XTC-3D with acrylic enamel paints. You can coat many surfaces than just those of 3D prints such as EPS, EPDM and urethane foam, wood, plaster, fabric, cardboard, aluminum, steel and more.
Properties
Technical Properties
Mix Ratio by Weight 100A:42B
Mix Ratio by Volume 2A:1B
Pot Life 10 minutes
Tack Free Time 2 hours
Cure Time 3.5 hours
Color Clear (thin layer)
Shore Hardness 80D
Mixed Viscosity 350 cps
Specific Volume 25.1 cu. in./lb.
Specific Gravity 1.09g/cc

 

Media

SMOOTHING THE SURFACE OF A 3D-PRINTED MODEL USING XTC-3D EPOXY COATING

ADDING A METALLIC FINISH TO A 3D-PRINT USING XTC-3D EPOXY COATING & METALLIC POWDER

Documentation
Special Order Items
PRODUCT ADVISORY:
The products listed below are currently SPECIAL ORDER items and require pre order.
Lead times may vary - For more information please contact our staff.


800482 - XTC-3D Print Epoxy Coating - Five Gallon Kit

Payment & Security

Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like