Smooth-Sil 960

SKU: 800974

Size: Quart Kit
Price:
$61.95

Description

Unit Size Net Weight
Quart Kit 2.2 lb
Gallon Kit 11 lb
Five Gallon Kit 55 lb

 

 

Smooth-Sil 960 is a Shore 60A platinum cure silicone rubber developed for a variety of industrial applications. Compared to other 60A platinum silicones, Smooth-Sil 960 has a relatively low viscosity and is easy to mix, de-air and pour. Silicone cures in 16 hours with negligible shrinkage to a firm rubber with high tensile and tear strength. Smooth-Sil 960 offers good chemical and heat resistance, making this a good choice for production casting of resins and expanding foams. Because of its firmness, Smooth-Sil 960 molds are also used for spin casting. It is also used for embedding and electrical applications. Note: This product will not cure against surfaces containing sulfur, even when sealed. Smooth-Silª 960 is Food Grade compliant.
Properties
Technical Properties
Mix Ratio by Weight 100A:10B
Mix Ratio by Volume N/A
Pot Life 45 minutes
Tack Free Time 16 hours
Color Green
Shore Hardness 60A
Mixed Viscosity 30,000 cps
Shrinkage < .001 in./in.
Specific Volume 22.2 cu. in./lb.
Specific Gravity 1.25g/cc
Useful Temperature (max)< 450¼F
Useful Temperature (min)< -65¼F
Tensile Strength 650 psi
100% Modulus 280 psi
Elongation @ Break 270%
Die B Tear Strength 110 pli

 

Smooth-Sil 960 is suitable for making baking molds and trays, ice trays, casting butter, chocolate and other applications used to produce foods. Smooth-Sil 960 has been tested by an independent laboratory to comply with the total extractive limits when properly processed and heat cured. Refer to the Smooth-Sil Platinum Series technical bulletin for proper processing instructions for Smooth-Sil 960 (available at www.smooth-on.com).Wash mold cavity thoroughly with dishwashing detergent/water solution. Rinse thoroughly and allow drying before using.

Compliance - The ingredients and ingredient levels in Smooth-Sil 960 comply with 21 CFR 177.2600, rubber articles for repeated use subject to the total extractive limits as specified and published in the Code of Federal Regulations. FDA compliance does not mean that Smooth-Sil 960 is FDA approved.

Using Mold For Bakingá Place mold on a baking sheet for greater stability and handling.á Do not expose rubber to temperatures above 400¡ F / 204¡ C. Do not subject molds to the broiler.á Silicone rubber does not distribute heat evenly. Food in shallow molds will bake faster vs. deep draft molds. Thick sections will retain heat longer than thin sections. Check frequently for doneness on first use.á Clean molds with soapy warm water and a soft sponge and rinse thoroughly between batches or prior to storing. You can dry the mold quickly in an oven. Bake for 5 minutes at 300¡F / 150¡C.
Media
HOW TO MAKE A SILICONE MOLD OF A PROTOTYPE PART USING SMOOTH-SIL 960 SILICONE RUBBER
Documentation
Special Order Items
PRODUCT ADVISORY:
The products listed below are currently SPECIAL ORDER items and require pre order.
Lead times may vary - For more information please contact our staff.


800976 - Smooth-Sil 960 - Five Gallon Kit
Related Products

Payment & Security

Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like