Mold Max Stroke

Unit Size	Net Weight
Quart Kit	2 lb
Gallon Kit	11 lb
Five Gallon Kit	55 lb

 

Mold Max Strokeª is a brushable tin silicone rubber that self-thickens for making fast brush-on molds of almost any model. Properly applied, it will hold a vertical surface and will reproduce the finest detail.

Technical Properties

Mix Ratio by Weight	100A:10B
Pot Life	30 minutes
Tack Free Time	60 minutes
Cure Time	16 hours
Color	White
Shore Hardness	30A
Mixed Viscosity	Brushable
Shrinkage	0.002 in./in.
Specific Volume	23.5 cu. in./lb.
Specific Gravity	1.18g/cc
Useful Temperature (max)<	400¼F
Useful Temperature (min)<	-65¼F
Tensile Strength	577 psi
Elongation @ Break	300%
Die B Tear Strength	125 pli

 

Mixed 100A:10B by weight, rubber quickly develops thixotropy and can be applied with a brush or spatula. Working time is 20 minutes, re-coat time is 45 minutes and cure time after the final layer has been applied is 16 hours at room temperature.

Mold Max Strokeª silicone will not stick to most surfaces and will cure with negligible shrinkage to a strong flexible Shore 30A rubber. Four thin layers is all that is necessary to make a strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.).

Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.

Although not usually necessary, a release agent will make demolding easier when casting into or over most surfaces. Ease Release¨ 200 is a proven release agent for making molds with silicone rubber and for releasing new silicone from cured silicone.

Technical Bulletin

PRODUCT ADVISORY:
The products listed below are currently SPECIAL ORDER items and require pre order.
Lead times may vary - For more information please contact our staff.

799513 - Mold Max Stroke - Five Gallon Kit