|Unit Size||Net Weight|
|Gallon Kit||9.9 lb|
|Five Gallon Kit||49.5 lb|
|Mix Ratio by Weight||100A:10B|
|Pot Life||45 minutes|
|Cure Time||24 hours|
|Mixed Viscosity||20,000 cps|
|Specific Volume||25.6 cu. in./lb.|
|Useful Temperature (max)<||400¼F|
|Useful Temperature (min)<||-65¼F|
|Tensile Strength||490 psi|
|100% Modulus||35 psi|
|Elongation @ Break||600%|
|Die B Tear Strength||94 pli|
Mold Max¨ 15T Silicone can be thickened with THI-VEX¨ II additive for brush-on applications. It can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).
Although not usually necessary, a release agent will make demolding easier when casting into or over most surfaces. Ease Release¨ 200 is a proven release agent for making molds with silicone rubber and for releasing new silicone from cured silicone.
Special Order Items
The products listed below are currently SPECIAL ORDER items and require pre order.
Lead times may vary - For more information please contact our staff.
799439 - Mold Max 15T - Five Gallon Kit
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.