Ease Release 2831

Ease Release¨ 2831 is a wax-based non-silicone liquid release agent. It has proven to be effective when used to release polyurethane foams. This wax dispersion is designed to operate at mold temperatures ranging from 160¡F to 230¡F with minimal wax build-up. EASE RELEASE 2831 works with aluminum, steel, and elastomeric mold construction.

Hazmat
Additional shipping/handling charges may apply on hazardous material shipments.

FEATURES:

EASE RELEASE 2831 is :
- Non-silicone base
- Contains no chlorinated or CFC solvents
- Low wax build-up

EASE RELEASE 2831 provides:
- Increased productivity
- Excellent cleanability
- Low environmental hazards
- Low mold maintenance


APPLICATION - - SHAKE WELL BEFORE USING

1. Apply a coat of ER2831 with a spray or brush, and allow too dry.
2. Rub EASE RELEASE 2831 into mold surface with a clean cloth.
3. Repeat two or three times to seal the mold surface.
4. Start molding and re-apply a light coat of ER2831 after each molding cycle.

Technical Bulletin

PRODUCT ADVISORY:
The products listed below are currently SPECIAL ORDER items and require pre order.
Lead times may vary - For more information please contact our staff.

798130 - Ease Release 2831 - Five Gallon