Clear Flex 50

SKU: 701020

Size: Quart Kit
Price:
$85.95

Description

Unit Size Net Weight
Quart Kit 3 lb
Gallon Kit 24 lb
Five Gallon Kit 120 lb

 

 

Clear Flex 50 is a water white clear urethane liquid rubber compound designed for applications that require absolute clarity and resistance to sunlight. Low viscosity ensures easy mixing and pouring. Clear Flex 50 cures at room temperature with negligible shrinkage. Cured castings are clear, flexible and UV Resistant. Vibrant colors and color effects are achieved by adding pigments.Applications include making clear-cut molds, model reproductions, decorative cast pieces, special effectsprototype parts.
CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY.
Properties
Technical Properties
Mix Ratio by Weight 1A:2B
Mix Ratio by Volume N/A
Pot Life 25 minutes
Cure Time 16 hours
Color Clear
Shore Hardness 50A
Mixed Viscosity 250 cps
Shrinkage 0.0015 in./in.
Specific Volume 26.8 cu. in./lb.
Specific Gravity 1.04g/cc
Tensile Strength 250 psi
Elongation @ Break 500%
Die C Tear Strength 25 pli

 

CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY.

Proper ventilation, A NIOSH Approved Respirator and Protective Clothing are required to minimize the risk of inhalation and dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read MSDS before using.

Post Curing Castings will cure faster and achieve maximum physical properties and heat resistance if Clear Flex 50 is post cured. Post curing is recommended if castings are thin or low mass concentration.Castings should be post cured in a mold or support structure.Post Cure Schedule: Allow the material to cure for 6 - 8 hours at room temperature followed by 16 hours at 150 - 160 F (65 - 72 C). Allow casting or part to cool to room temperature before demolding. For most applications, room temperature curing (70 F/ 22 C) for 24 - 48 hours is adequate. Castings will reach ultimate physical properties at room temperature in 5 - 7 days. Castings removed from mold before 12 hours may exhibit a tacky surface that can be eliminated by exposing casting to 150 F / 65 C for 4 - 6 hours. If you are pouring less than 1/4 in./.64 cm of material, the casting should be heat post cured.
Documentation
Special Order Items
PRODUCT ADVISORY:
The products listed below are currently SPECIAL ORDER items and require pre order.
Lead times may vary - For more information please contact our staff.


701040 - Clear Flex 50 - Five Gallon Kit
Related Products
RELATED PRODUCTS:

Mixing Equipment


Payment & Security

Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like