Proseal Stone Sealer

Tenax Proseal Ultra Premium Stone impregnating sealer is rated by fabricators as one of the best granite, marble, stone sealers to be used on natural stone. Tenax Proseal is suitable to protect granite against practically all potential kitchen stain causing items: coffee, wine, oil, peanut butter, mustard, ketchup, soda, etc. Proseal impregnating sealer also works well with polished, honed, brushed, matte, finishes. Tenax Proseal fills the pores and seals marble, travertine, and limestone porous stones protecting the stone from oil and water stains. Proseal can be used for sealing grout. Outstanding for indoor and outdoor applications, Proseal is recommended for stone that will be exposed to wet conditions such as showers, patios, outside bars, pool copings, pavers, etc. Tenax Proseal does not change the natural colors of the stone and allows the stone to breathe without leaving a film on the surface. Wait 24 hours to allow the stone to dry and reach 100% protection. The protection will last up to 4-5 years if the product is applied correctly on the surface and areas that are not under direct wear and use.

DIRECTIONS: This product must be evenly applied on a completely clean and dry surface. Spread Tenax Proseal evenly with brush, sponge, cloth or spray gun until surface no longer absorbs product. After a few seconds buff with a clean cloth. Any excess of Tenax Proseal creates superficial glossy and sticky films so any excess must be removed immediately after the application. Repeat after 10-15 minutes. Do not walk on floor for 24 hours.

IMPORTANT: When using Tenax Proseal for the first time we suggest testing on a small hidden area first.

COVERAGE: One liter of Proseal treats approximately 215-323 sq. ft depending on the porosity of the stone.

SHELF LIFE: This product will last at least 1 year if kept between 65F(18C) and 77F(25C). Keep away from heat, humidity and sunlight.