/ REGISTER HERE shopping cart 0 Item(s)
sculpture supply
sculpture supply canada about us contact us ordering events news techinical info videos media
SEARCH
CATEGORIES
ABRASIVES
ADHESIVES
AIR TOOLS
AIRBRUSH CREATEX COLORS
AIRBRUSH SUPPLIES
ANIMATION FX
AQUA-RESIN
ARMATURE SUPPLIES
BALD CAP MATERIALS
BODY CASTING MATERIALS
BOOKS
BUDDY RHODES CONCRETES
CARVING STONES
CARVING TOOLS
CASTING EQUIPMENT
CASTING MATERIALS
CERAMIC SHELL MATERIALS
COSPLAY SUPPLIES
DIY COMFORT EAR SAVERS
DIY PROTECTIVE FACESHIELD
DIY PROTECTIVE RESPIRATOR
DOLLMAKING SUPPLIES
DVD
EPOXY SYSTEMS
EZ SPRAY JR. SYSTEM
EZ-MIX METER MACHINE
FILLERS
FOAM CARVING SUPPLIES
GIFT CERTIFICATES & SETS
GLASS CASTING SUPPLIES
HAND SANITIZER
JEWELRY SUPPLIES
LIGHTING EQUIPMENT
LIQUID FOAMS
LIQUID PLASTICS
MAKE-UP FX
MAKERBOT 3D PRINTING
MASK MAKING SUPPLIES
METAL EMBOSSING SUPPLIES
METAL FORMING MESHES
METAL LEAFING
MIXING SUPPLIES
MODELING MATERIALS
MODELING TOOLS
MOLD MAKING ADDITIVES
MOLD MAKING TOOLS
MOUNTING HARDWARE
P-CHROME COATINGS
PAINTS
PATINAS
PATINAS BIRCHWOOD CASEY
PATINAS JAX CHEMICAL
PATINAS SCULPT NOUVEAU
PIGMENTS & TINTS
PLASTER & GYPSUM CEMENT
POLISHING MATERIALS
POWER TOOLS
REINFORCING MATERIALS
RESTORATION MATERIALS
RUBBER LATEX
RUBBER POLYURETHANES
RUBBER SILICONES
SAFETY EQUIPMENT
SCALES
SEALERS & RELEASES
SSC WORKWEAR
TEXTILE MODELING
VACUUM BAGGING SYSTEM
 

* Price: $10.17

Qty
*All prices are in Canadian funds.

pdf

Q-Ballz Encapsulant & Bald Cap Material 4oz (801135)
Q-Ballz is a single component liquid that can be used as a bald cap plastic or for encapsulating silicone gel prosthetic appliances. Thin with acetone to airbrush material into a mold (or over a plastic head form) for creating a membrane. Use as soon as possible after opening. The edges of a silicone prosthetic appliance encapsulated in Q-Ballz can be dissolved away with acetone. Q-Ballz can also be used to create bald caps on an appropriate head form.

INSTRUCTIONS:

WARNING - FLAMMABLE Liquid and vapor. Keep away from ignition sources and follow precautions for handling flammables. Materials should be stored and used in a warm environment (73F / 23C). This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Important: Shake Q-Ballz Container Well Before Using.

FOR CREATING BALD CAPS:

  • Apply a thin layer of release agent, such as Ease Release 200 or petroleum jelly, to a bald cap head form.
  • Stipple undiluted Q-Ballz thinly over the desired area of the bald cap head form.
  • Allow at least 10 minutes of drying time between layers.
  • Repeat steps 2 to 3 to build up an appropriate thickness. Generally, 5 to 10 layers are sufficient.
  • Allow at least 2 hours for acetone to completely flash off before removing bald cap from the head form.
  • Powder outside of bald cap using talcum powder.
  • Remove bald cap from head form gently using a soft brush and talcum powder.
  • Fine edges of the completed bald cap can be dissolved using acetone.


FOR USE AS AN ENCAPSULANT FOR SILICONE APPLIANCES:

  • Apply a thin layer of release agent, such as Ease Release 200 or petroleum jelly, to all surfaces of prosthetic mold.
  • Thin Q-Ballz with acetone. Generally 3 to 4 parts acetone added to 1 part Q-Ballz is sufficient.
  • Using an airbrush or other fine mist sprayer, spray a thin layer of thinned Q-Ballz over all mold surfaces.
  • Allow at least 10 minutes of drying time between layers.
  • Repeat steps 3 to 4 to build up an appropriate thickness. Generally 5 to 10 layers are sufficient.
  • Fill mold using a silicone gel such as Ecoflex Gel or Dragon Skin softened with SLACKER.
  • Allow silicone gel to fully cure.
  • Optional - spray 3 to 4 thin layers of thinned Q-Ballz over back of appliance.
  • Demold silicone gel filled appliance with the assistance of a soft bush and talcum powder.
  • Fine edges of the completed encapsulated appliance can be dissolved using acetone.


Q-Ballz Encapsulant & Bald Cap Material How-To Video